30V 10A Electroplating Machine:

Model NO:HJ-245


Input voltage: AC220V±10% 50HZ 

Voltage stability: 0.2%

Current stability: 0.8%

Load stability: 0.2%

Ripple and noise: 1% (effective value)

output voltage: 0-30V (adjusted)

Output Current: 0-10A (adjusted)

Net Weight: 2.15KG; 

Gross weight: 2.7kg.

Size: 290x130x160mm.

Packing size: 380*190*220mm.

Working conditions:

Ambient temperature: Temperature: -10°C - 40°C Relative temperature: <90%

Storage Environment: Temperature: -20°C - 80°C Relative Temperature: <80%

Instructions for use:

1. Turn on the power (check whether the input voltage is consistent with the nominal)

2, the steady flow setting clockwise rotation to the maximum

3, the power is placed in the "ON" position, the indicator light, LED display

4, adjust the regulator settings, select the desired voltage output

5. Connect the load to the "+" "-" output terminal. When the pattern factor is required to be high, please make sure that the “+” “-” output terminal must have a reliable ground “GND” to reduce the ripple.

6. Constant current setting: first adjust the voltage to any value of 3-10V, set the steady current adjustment to OA, then use the wire to short-circuit the output positive and negative, and then adjust the steady flow setting knob clockwise to the desired current value. Remove the short-circuit wire and adjust the voltage to the desired value. (There may be slight noise when there's short circuit occured, it is normal.)